Variable diffuser lengths

Normally, the OXYFLEX® MS70 Membrane Tube Diffuser is installed in pairs and is available in three standard sizes:

  • OXYFLEX® MS70 -1.0 (comprising 2x MS70-500 mm, Ø 70 mm)
  • OXYFLEX® MS70 -1.5 (comprising 2x MS70-750 mm, Ø 70 mm)
  • OXYFLEX® MS70 -2.0 (comprising 2x MS70-1000 mm, Ø 70 mm)

Other lengths are available on request.

The body is a polypropylene tube. The membrane is pulled onto this tube and fastened with a 1-ear clip. The membrane is delivered in EPDM as standard. PUR membranes are also available. The standard slot pattern is optimized to achieve fine-bubble aeration with maximum oxygen transfer efficiency.

Low-maintenance operation - installation on different tube materials

In general, OXYFLEX® MS70 Membrane Tube Diffusers can be operated intermittently.

Due to the various assembly options, OXYFLEX® MS70 Membrane Tube Diffusers are suitable for installation on both stainless steel pipes and plastic pipes.

OXYFLEX® MS70 Membrane Tube Diffusers have a proven track record in municipal and industrial plants worldwide.

Operating range from 0 to 12 Nm³/h per running metre of diffuser length

OXYFLEX® MS70 Membrane Tube Diffusers have an operating range for EPDM and PUR membranes between 0 and 12 Nm³/h per running metre. The design specific load should be 2 to 9 Nm³/h per running metre.

OXYFLEX® MS70 Membrane Tube Diffusers can reach a specific standard oxygen transfer efficiency up to and in excess of 25 gO2/(Nm³ x m) in clean water for the flat layout and correct water depths.

OXYFLEX® MS70 Membrane Tube Diffusers are also available as coarse-bubble diffusers on request.

Beschreibung Datei
General Information + Assembly Instructions download (PDF, 0.71 MB)